Electronic supplies information sheets information database 2022? Then, as demand for cars picks up in the fall of 2020, Toyota Denso Renesa plans to order 28nm semiconductors from TSMC again, but there is no room to produce in-car semiconductors because TSMC lines are occupied by other semiconductors. Although the inventory in the autumn and winter of 2020 exceeded the limit, by 2021, inventory had bottomed out, coupled with the shortage of 28nm semiconductors, cars could not be made. 28nm is the last generation of planar transistors (FinFET from 16 / 14nm to 3D) (2) do not use self-aligned double pattern (SADP) (will use SADP from FinFET) (3) Renesas vertical integration (integrated equipment manufacturer IDM), for example, outsource production to FinFET from this generation. In short, 28nm semiconductors produced by TSMC and other contract factories have a good performance-to-price ratio, so many electronic devices, including automobiles, use this semiconductor. At the invitation of the Japanese government, the TSMC Kumamoto plant, which will begin operation in 2024, will also mainly produce such 28nm semiconductors. Read additional information on https://www.easybom.com/p/rhk003n06frat146-rohm-semiconductor-6829545.

In the early CPUs, the chip integration level was very low. The CPU was a single chip. It only integrated an arithmetic unit and a controller. It could only calculate and control. At this time, the internal capacity of the CPU was useless. Memory, the CPU left The memory cannot be calculated. Back then, there was no memory in the CPU because the memory could not be integrated, and others such as the serial port could not be integrated, so there was only a single CPU. If you need to use the serial port, you need to use a serial port controller chip outside the CPU. The PCB traces are connected to the CPU, and then the entire PCB board is composed of the CPU, and these peripheral chips is called a system board. This system board can communicate with another system board. The CPU communicates with another system through its serial port controller. The serial port controller on the board communicates, and functions such as the serial port controller cannot be integrated into the CPU chip. For example, if the LCD is also used here, it is necessary to add an LCD controller chip to the periphery and connect it to the CPU through wiring. A whole board composed of these chips is called a system board. These UART controllers and LCD controllers are called peripherals. Combining them with the CPU on one board is the function implemented by a current K60 chip, but they are integrated into a small chip. The peripherals here refer to the inside of the system board, the peripherals outside the CPU are called peripherals, the CPU is called the internals, and there are only arithmetic units and controllers inside, which are called internals.

Easybom, an international integrated service provider for the electronics industry, persists in pursuing the concept of “win-win”. Dedicated to providing electronic component big data information services that are maintained by senior industry engineers, easybom has established an excellent communication platform for merchandisers, suppliers, and engineers through our powerful electronic component search engine. Easybom will keep focusing on the leverage of our high-quality services for data mining and information matching. Easybom establishes a communication bridge for suppliers, purchasers and engineers with electronic component data as its core.

After successfully settled in easybom, the manufacturers can display the products sold on easybom and sell them efficiently. You can display and sell products on the Easybom platform. Connect to millions of engaged Easybom users when you partner with us. Easybom API: We have built a flexible API that allows you to customize the data you receive to optimize your experience. The platform provides any product among which you need to compare prices. Help you find the best quality products and buy them from suppliers.

When the user equipment communicates with the AP1, because the equipment receives the interference signal of the AP2 with the same frequency, the user equipment will mistakenly think that the cell of the AP1 is being occupied by other devices in the cell at this time, so wait for the next time period to send. As a result, network performance is degraded. Not only multi-cell networking, this kind of interference problem will also occur when the Wi-Fi AP is very close. For example, although you have only one wireless AP in your home, if your next-door neighbor has an AP deployed on the same channel as you, CCI will also reduce the success rate of your device access. Sadly, most manufacturers put Wi-Fi AP’s default channel on the first channel when the device leaves the factory. In this way, the problem of interference is even more serious. If you find this problem, you might as well change the Wi-Fi AP channel at home, which will significantly reduce interference and increase Internet speed. The solution of Wi-Fi 6 is to distinguish the local cell from the interference cell by introducing BSS Coloring (Cell Color coding) technology into the MAC layer. In other words, when working on the same channel, the AP that interferes with each other will be distinguished by different color codes. See even more details at electronic components.