High quality street lights provider: Flip Chip COB – Flip-chip is the next step in LED manufacturing. There is no wire bonding step, which results in better illumination, as the semiconductors require less space and can have denser formations. Since there are no wires, there is a lower blockage, leading to a further increase in illumination. Typically, high-end street LEDs will feature a flip-chip COB. Driver on Board (DOB) – It is a less common design opted by LED manufacturers as it increases the heat load in one area. LEDs require power to light up. The circuit that powers them is called the driver. Some designs with compactness or low-power applications can have DOB LED designs. The driver is beside the set of LEDs mounted on the same substrate. It is better to have a driver in a separate compartment to improve heat transfer capabilities and avoid damage to components in high heat and harsh environments. See even more info at customized led flood light.
The technology of HID lamps can be traced back to 1675, when Jean-Felix Picard discovered that his mercury barometer glows when shaken. However, the first HID commercially available bulb was made in 1965. It produces 95 lumens/watt, which is competitive with HPS and LED but also has similar omnidirectional light problems. The electricity that goes into the bulb passes through the xenon gas inside the glass chamber. It causes the xenon gas to ionize, forming an arc that vaporizes sodium and mercury to create light. The light is yellow in the range of 1900 to 2000 degrees Kelvin. These lamps have low color rendering capabilities. HID lamps also pass high electricity through a gas to create light. They require a ballast to operate. They contain tungsten electrodes inside a fused alumina arc or quartz tube. The noble gas of suitable metal or metal salt is used to enable the arc’s initial strike. They are also known as arc lamps.
The Ingress Protection (IP) is a set of international ratings that tells how much an electrical device is dust and water-resistant. For example, an IP65 rating means the device is dust-resistant and can protect itself against water splashes. The IK ratings are a set of international standards that define the degree of protection for an electrical enclosure against external mechanical impacts. The numeric representation of the IP/IK rating is from 0-10. A higher IK08 rating means the electrical flood light can withstand physical shocks. Having a solid IP/IK rating is vital for installation in a public place. Manufacturers refer to a flood light’s lifespan in terms of working hours (h). Working hours depend on multiple factors, including the type of lamp and the weather conditions in which it is installed. LED-type floodlights offer the most working hours, up to 50,000 hours.
LED tube energy saving is more than 70%, life is more than 10 times that of ordinary lamp (in theory, it can reach more than 50,000 hours), almost maintenance-free, there is no need to change lamp, ballast, starter frequently The problem can be exchanged for the cost saved in about half a year. The green and environmentally-friendly semiconductor electric light source has soft light and pure color, which is beneficial to people’s vision protection and health. Applicable occasions: Hotels, shopping malls, schools, hospitals, factories and underground parking lots are widely used to replace traditional T5 fluorescent lamps.
Our LED light fixture can be divided into indoor LED lighting and outdoor LED lighting according to the place where LED lamps are used. Indoor lighting requires high brightness, good color consistency, high color rendering, and high versatility. Outdoor lighting requires high brightness, long life, and good resistance to harsh environments. Our LED lamps feature high luminous efficiency, low energy consumption, long life, safety, and environmental protection. They can operate for more than 50,000 hours without failure, widely used in factories, warehouses, shopping malls, roads and other public places that require long-term lighting.
Flood lighting, also known as the LED spotlight and LED projection light, is controlled by built-in microchips. There are two types of chips, one is the combined power chip and the other is a single high-power chip. The former has a more stable performance, but the later has a large structure and can achieve very high power to offer long-distance and large-area illumination. LED flood light illuminates the surface higher than the surrounding. It is also known as the spotlight. Typically, the best LED flood light can be aimed in any direction and its structure is seldom affected by climates.
Features of CHZ outdoor LED street lighting: LED chip: Using PHILIPS chip, with high efficiency and long service life > 50000 hours. Driver: Using Meanwell or Inventronics driver, IP66 rated, high quality with improved performance. Power efficiency = 0.95. Color Temperature: LED street light provides a color temperature range of 3000, 4000, 5000, 5700, and 6500 Kelvin, excellent in improving the appearance of the building. Optics: Optical components reach IP66 protection standards. The LED optical system maximizes light to the target area for improved light uniformity. See extra info on chz-lighting.com.
Most LED street lights are installed with a solar panel that helps in generating backup power hence reducing the operational costs incurred. In other words, instead of using electricity, most manufacturers install a solar panel in the lighting system to provide the required energy. Such lights have some added advantages, especially those that operate in areas that experience at least 10 hours of sunlight. The light source usually recharges its batteries and uses the energy to provide light at night. Such a system is paramount in ensuring that the street light illuminates an area throughout the year.
CHZ Lighting focuses on LED outdoor lighting and high-power indoor lighting. The company has always adhered to the high standards of “leading technology and leading quality”, constantly developing new products, leading the trend of intelligence, insisting on the use of high-quality raw materials and advanced production technology, and focusing on the manufacture of each lamp. The main products have passed TUV, ENEC, CB, ROHS, UL, DLC, CE, SAA, and other international standards certification.
The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.
