Top quality topcoat paint & caliper paint online shopping? POR-15 Rust Preventive Coating is a high performance coating designed to paint directly on prepped rusted or seasoned metal surfaces to stop rust permanently. POR-15 Rust Preventive Coating is non-porous and seals and protects many surfaces from water, chemicals, salt, and other corrosive contaminants and is able to be painted over rust. POR-15 Rust Preventive Coating is an effective anti-corrosive and rust preventive coating that offers superior chemical resistance due to its dense, cross-linked molecular composition and non-porous attributes.
A special fiberglass reinforcing fabric that can be used with POR-15 Rust Preventive paint to bridge gaps and repair holes in sheet metal. Handling Instructions: Do not handle fabric with bare hands. Because it is a special type of fiberglass cloth, the fibers may pierce your skin and you will experience discomfort. Wear a pair of gloves (or other protection) whenever you handle this cloth. As you cut the cloth, some fibers may fly into the air, so be sure to wear the mask provided while cutting. Please note that there is one large piece of cloth in this envelope.
POR-15 Rust Remover will safely remove light to even heavy rust completely from metal surfaces and will not affect plastic, PVC, Viton, or most paints. One gallon derusts several hundred pounds of heavily rusted steel, this equates to around 1/2 to 3/4 pounds of dry rust removed per gallon. Rust Remover will not harm unrusted steel and is safe on other metals. Rust Remover has no fumes or bad odors and no VOCs. No sanding or scrubbing required. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. All of the rusted areas must be submerged in the Rust Remover for it to work. When all of the rust has been removed, rinse the metal pieces with water. POR-15 Rust Remover works in as little as 20 minutes for light rust or overnight for heavy rusted metal. For best results use POR-15 Cleaner Degreaser to clean parts before using POR-15 Rust Remover. Find extra details on https://por15.com/products/rust-remover.
Mask off the areas not to be painted. Tape off the brake bleeder screw, brake lines, and caliper piston boots and anything else you don’t want painted. Open the small can of POR-15 Rust Preventive Coating and stir, making sure the contents are thoroughly mixed. Using a foam brush (included in your kit) paint the caliper evenly, making sure the coating is evenly applied but not to the point where the paint runs. Because this is a rust preventive coating you want to be sure you don’t miss any spots which could rust later if not covered.
Jason Anagnostis holds a Ph.D. in chemistry and has over 17 years of industry experience, spanning the design and formulation of UV curable, architectural, industrial, and automotive finishes. He was instrumental in growing the POR-15 Brand as a groundbreaker in rust preventive and restoration coatings. Jason’s skills, expertise, and enthusiasm for car culture and auto restoration will continue to help grow the business and strengthen the innovative strive of the company while keeping it rooted in customer service. Read extra information on https://por15.com/.
